Las Vegas NV Driveway Widening Site Plan: Proposed Width, Parking Layout and Property Lines

A wider driveway can provide more room to park, open vehicle doors and approach the garage. Before adding pavement, check how the proposed extension fits within the property and connects to the existing street entrance.

A Las Vegas driveway widening site plan shows the existing driveway, proposed paving and intended parking arrangement. It helps explain the project’s scope, particularly whether the work affects only private property or also changes the curb, sidewalk or driveway approach.

Planning to widen your Las Vegas driveway?

Start with a clear drawing of existing pavement and the proposed extension. Review our site plan service and provide your property documents, dimensions and submission requirements.

Order Your Driveway Site Plan

Las Vegas driveway widening site plan illustration showing existing and proposed paving, parking layout, property boundaries and sidewalk.
Conceptual illustration distinguishing existing driveway pavement from proposed widening. The layout does not establish legal boundaries, allowable widths or an approved curb opening.

Confirm the Property’s Jurisdiction First

Check which authority reviews your address before using a driveway standard or submitting an application. A Las Vegas mailing address alone does not establish that the property is within City of Las Vegas jurisdiction.

The City’s permit guidance directs applicants to verify jurisdiction before proceeding. It also explains that zoning, aesthetic review or other planning approvals may be involved before construction.[1]

This guide focuses on the City of Las Vegas. Obtain the appropriate requirements if another municipality or Clark County handles your property.

Separate Private Paving from the Street Entrance

Adding a strip beside an existing driveway and widening the curb opening are different proposals. Your drawing should make that distinction obvious.

Identify whether the project includes:

  • Additional paving beside the existing driveway.
  • A larger parking area closer to the garage.
  • Changes to the driveway apron or approach.
  • Removal or replacement of curb, gutter or sidewalk.
  • A relocated or additional vehicle entrance.

Las Vegas’s residential parking provisions define an approved driveway by reference to compliance with applicable City curb-cut requirements.[2] Additional paving should not be treated as authorization to drive over an unapproved section of curb or sidewalk.

Ask the City which reviews, plans and permits apply to the actual scope. Describe any proposed work at the street edge explicitly.

Show Existing Width, Added Width and Total Width

A useful site plan should explain how much pavement exists and how much will be added. One overall dimension may leave the proposal unclear.

Label the existing driveway separately from the extension. Where the layout changes width, show the relevant dimensions at each change rather than assuming the driveway is a constant-width rectangle.

Helpful measurements include:

  • The existing driveway width.
  • The width and length of the proposed paving strip.
  • The combined proposed width.
  • The width at the street entrance.
  • The usable parking depth behind the sidewalk.
  • Distances between proposed paving and relevant boundaries.

Las Vegas’s development code states that driveway design and construction must comply with City standards.[3] Confirm the applicable dimensional and construction requirements before finalizing the drawing.

Base the Layout on Reliable Property Information

Gather an available survey, recorded plat and relevant easement documents. Show property lines separately from walls, fences, curbs and pavement edges.

Do not assume that a side wall marks the legal boundary or that the entire area between the house and street is available for private paving.

A basic drafted site plan communicates supplied information. It does not establish legal boundaries or replace a required survey. Resolve uncertain boundary locations before using them for construction measurements.

If an easement affects the proposed extension, review the recorded document and seek clarification about restrictions before proceeding.

Show a Practical Parking Layout

Draw the intended parking positions so the layout can be assessed as a usable space. Consider door opening, garage access and the route a driver will take when entering or leaving.

For example, widening pavement beside a driveway may improve passenger access without creating enough usable space for another vehicle. Show the intended arrangement clearly instead of assuming that added square footage equals an additional parking space.

The City’s residential vehicle-parking provisions address acceptable parking surfaces and include a general limit of 50 percent of the front-yard area for vehicle storage or parking, subject to the section’s exceptions.[2] Confirm how the applicable rules affect your proposal.

Planning detail Question to resolve
Parking positions Can the intended vehicles fit within the proposed parking area?
Garage access Can vehicles approach the garage without awkward maneuvering?
Walking route Is there practical access between parked vehicles and the house?
Street connection Does the layout connect through the intended, approved vehicle entrance?

Keep the Sidewalk and Nearby Features Visible

Show the sidewalk as its own feature, including where it crosses the driveway. Also identify nearby utility boxes, streetlights, trees, walls and other improvements that could affect the design.

If the proposal changes the sidewalk crossing, ask the reviewing department what details are needed for pedestrian access and the driveway transition.

On a corner lot, discuss visibility near the intersection and any nearby driveway exits. Do not copy sight-distance dimensions from another city or a different type of project.

Review Drainage and Landscaping Before Paving

Additional paving changes the ground surface and may affect water flow. Discuss existing low points, drainage routes and the proposed surface levels with the contractor.

Ask whether the project requires grading details or drainage review. Where professional design or surveyed elevations are required, obtain that information rather than adding assumed slopes to a basic drawing.

Also check how the extension affects planting areas and any applicable development standards. A paving layout should be considered alongside the rest of the front yard.

Use the Standards That Apply to Your Development

Some Las Vegas developments have their own design requirements. For example, the City publishes Sunstone design guidelines containing driveway-width, paving-treatment and planting-area provisions.[4]

Those provisions should not be applied as universal rules for every Las Vegas address. Confirm which zoning conditions, development standards and private association requirements apply to your parcel.

What to Provide When Ordering Your Site Plan

Send your property address, available survey or plat, existing driveway measurements and a marked sketch of the proposed extension.

Include the intended parking arrangement and identify any proposed changes to the curb, sidewalk or street entrance. Photographs can help explain existing conditions.

Provide written City requirements or review comments as well. Confirm whether additional civil drawings, engineering or certified surveying are needed; a basic site plan does not replace those services.

Ready to organize your driveway widening layout?

Bring together your property information and proposed dimensions. Get started with a clear site plan showing existing paving, the extension and surrounding improvements.

Get Started with Your Driveway Site Plan

Official Sources

  1. City of Las Vegas: Building & Offsite Permits.
  2. Las Vegas Unified Development Code: Vehicle Parking, Storage or Repair in Residential Zoning Districts.
  3. City of Las Vegas: Unified Development Code, Section 19.02.230, Driveways. Confirm current amendments with the City.
  4. City of Las Vegas: Sunstone Design Guidelines, Section 4.F. These are development-specific standards.

Sources checked October 2026. Confirm jurisdiction, current requirements and property-specific conditions before purchasing materials or beginning construction.